-------PRE ENGINEERING CONCEPTUAL DESIGN AND PROMOTION SERVICES--------     MARINEIMAGING/KENNEDY DESIGN - 44' CHURCHILL BY KENNEDY SHIP AND REPAIR         Developing the concept for this 44' Patrol Boat that could launch a RIB from it's stern actually started from a 50' Aluminum fishing boat design provided by DNC of Mobile. We originated this design in AutoCAD (TM) which was further developed into the working model and cutting prints by DNC of Mobile. The vessel was built by Kennedy Ship and Repair of Galveston, Texas with daily oversight by the Alaska State Troopers captain. In order to meet the requirements for their operational area the bow was bull-nosed to bring the boat in under 45'. (Photos and 3D Imaging by Watson Enterprises - MarineImaging.com)     Highly detailed and tight-fitting, beautiful woodwork was provided by Master Craftsman Rodney Bailey who also did the interior work on the Mega-Watt, the teak decking on the Margaux, interior repairs on the Holo-Kai, and the interior of the Enforcer just to name a few.             The following sequences (video snapshots) shows that the RIB can launched and retrieved while underway and by just one person. In the event it is needed, the deck has a high capacity windlass and a hydraulic operated boom for hauling crab pots.           © 1997-2015 c.r. watson - all rights reserved The use of any trademarks, trademarked names, and/or copyrighted information is stated as a fact of record and is not intended to imply endorsement of any kind. The use of any pictures, writings, or materials from this site without express written consent of Charles R. Watson dba Watson Enterprises aka MarineImaging.com is forbidden.